{"id":2071,"date":"2026-06-18T22:49:53","date_gmt":"2026-06-18T22:49:53","guid":{"rendered":"https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/"},"modified":"2026-07-17T14:34:57","modified_gmt":"2026-07-17T14:34:57","slug":"how-to-work-safe-with-custom-lifting-equipment","status":"publish","type":"post","link":"https:\/\/www.bkl.nl\/nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/","title":{"rendered":"How to work safe with custom lifting equipment"},"content":{"rendered":"<p>Custom lifting equipment is often introduced when a standard hook, sling, cart, or lifting beam cannot safely handle the geometry, value, sensitivity, or working environment of the load. In high-tech manufacturing, semicon equipment, aerospace, optical systems and OEM production, that is a common situation. Components may be heavy, fragile, difficult to access, or positioned in a space where there is little margin for movement.<\/p>\n<p>To work safe with custom lifting equipment, the equipment itself is only one part of the answer. Safety depends on the complete lifecycle: task definition, engineering, risk assessment, manufacturing quality, testing, instructions, operator usability, inspection, maintenance and change control. A lifting tool that is strong on paper can still create risk if it is difficult to attach, hard to guide, poorly documented, or no longer in the same condition as when it was approved.<\/p>\n<p>This article explains a practical engineering approach for organizations that use or specify custom lifting equipment. It is written for engineering managers, safety managers, operations teams, OEMs, maintenance leaders and procurement teams that need reliable solutions without compromising workplace safety.<\/p>\n<h2>Start with the lifting task, not with the lifting tool<\/h2>\n<p>A safe lifting solution begins before any steel is cut or any CAD model is detailed. The first question is not \u201cwhat tool do we need?\u201d but \u201cwhat task must be performed, by whom, in which environment and under which constraints?\u201d<\/p>\n<p>Custom lifting equipment is often requested because the existing process has become uncomfortable, inefficient, or visibly risky. Operators may need to support a load manually while aligning bolts. Maintenance technicians may be forced to work around sharp edges or pinch points. A valuable module may need to be lifted through a narrow opening with only a few millimeters of clearance. In these cases, a custom solution can improve control, but only when the actual task is fully understood.<\/p>\n<p>A good task definition should capture the practical details that influence safety:<\/p>\n<ul>\n<li>Load mass, including tolerances, accessories, fluids, tooling and packaging.<\/li>\n<li>Center of gravity, including possible shifts during handling or rotation.<\/li>\n<li>Available lifting points, attachment interfaces and structural limitations of the load.<\/li>\n<li>Required movements, such as lifting, tilting, rotating, translating or positioning.<\/li>\n<li>Route through the production, installation, maintenance or transport area.<\/li>\n<li>Operator actions, line of sight, hand positions and communication needs.<\/li>\n<li>Environmental constraints, such as clean room rules, limited headroom, floor capacity or access restrictions.<\/li>\n<li>Frequency of use, expected duty cycle and required inspection or maintenance access.<\/li>\n<\/ul>\n<p>This phase is also where teams should decide whether a custom tool is truly necessary. Sometimes the safest and most efficient answer is a standard certified accessory, a modified procedure, a revised lifting point, or an inspection of existing equipment. Custom engineering adds the most value when the task, load or environment cannot be managed safely and efficiently with available standard solutions.<\/p>\n<h2>Engineer the complete load path<\/h2>\n<p>The load path is the physical route through which force travels from the load to the lifting device, through the custom tool and into the hoist, crane, manipulator or transport equipment. If one part of that path is unclear or underestimated, the whole lifting operation can become unsafe.<\/p>\n<p>For custom lifting equipment, engineering the load path means more than calculating the main beam. It includes attachment bolts, pins, welds, plates, adapters, locking devices, lifting eyes, contact surfaces and any moving mechanisms. It also includes the way forces change when the load is tilted, rotated, moved off-center, or handled dynamically.<\/p>\n<p>Engineering teams should consider relevant standards and design principles, such as risk assessment according to ISO 12100 and the requirements that may apply to non-fixed load lifting attachments, such as EN 13155. The applicable framework depends on the equipment, application and market, so it should be assessed case by case.<\/p>\n<div class=\"blogseo-table-wrapper\">\n<table class=\"blogseo-table\">\n<thead>\n<tr>\n<th>Load-path safety question<\/th>\n<th>Why it matters<\/th>\n<th>Typical engineering response<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Where is the real center of gravity?<\/td>\n<td>Incorrect assumptions can cause tilting, overload or unexpected movement.<\/td>\n<td>Verify mass distribution, define allowable load positions and add adjustment or balancing features where needed.<\/td>\n<\/tr>\n<tr>\n<td>How is the load attached?<\/td>\n<td>Weak or ambiguous interfaces increase the chance of misuse.<\/td>\n<td>Use defined attachment points, clear locking principles and interfaces that fit only the intended orientation where practical.<\/td>\n<\/tr>\n<tr>\n<td>What happens during movement?<\/td>\n<td>Dynamic forces may exceed static assumptions.<\/td>\n<td>Include dynamic factors, assess acceleration, braking, rotation and operator-controlled movement.<\/td>\n<\/tr>\n<tr>\n<td>Can the tool fail safely?<\/td>\n<td>Single-point failures can create high consequences.<\/td>\n<td>Evaluate redundancy, locking, retaining features and controlled load holding.<\/td>\n<\/tr>\n<tr>\n<td>Can the operator confirm correct engagement?<\/td>\n<td>Hidden interfaces create uncertainty during use.<\/td>\n<td>Add visual indicators, accessible inspection points, guide features or mechanical confirmation.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>The engineering objective is not only sufficient strength. It is predictable behavior. A custom lifting tool should help the operator understand where the load is, how it is supported and whether the tool is engaged correctly.<\/p>\n<h2>Design for the operator and the real working environment<\/h2>\n<p>Many lifting risks appear at the interface between the equipment and the person using it. A tool can be structurally sound but still difficult to use safely if it requires awkward hand positions, poor visibility, excessive manual force, unclear alignment, or too much interpretation from the operator.<\/p>\n<p>This is why occupational safety should be addressed during design, not added as a final warning label. BKL has written more broadly about this principle in relation to <a href=\"https:\/\/www.bkl.nl\/nl\/blog\/occupational-safety-in-machine-and-tooling-design\/\">occupational safety in machine and tooling design<\/a>, where the central message is that safety improves when risks are reduced at the source.<\/p>\n<p>For custom lifting equipment, operator-focused design may include guided positioning, handles placed outside pinch zones, clear markings, stable resting positions, controlled rotation, captive pins, defined parking locations and interfaces that reduce the chance of incorrect assembly. The goal is to make the safe method the practical method.<\/p>\n<p>In high-value and space-constrained environments, usability becomes even more important. Operators may need to position a module inside a machine frame, pass a component through a narrow opening, or work close to sensitive surfaces. In these cases, safe lifting is strongly influenced by clearance, access, visibility and the ability to control small movements. For a deeper look at that specific challenge, see BKL\u2019s article on <a href=\"https:\/\/www.bkl.nl\/nl\/blog\/safe-lifting-for-high-value-equipment-and-tight-spaces\/\">safe lifting for high-value equipment and tight spaces<\/a>.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.bkl.nl\/wp-content\/uploads\/a-custom-lifting-frame-supports-a-precision-indust-1781822989578.webp\" alt=\"A custom lifting frame supports a precision industrial module on a workshop floor, with clear attachment points, guide pins, safety markings and accessible hand positions for operators.\" class=\"blogseo-image\"><\/p>\n<h2>Build compliance and documentation into the project<\/h2>\n<p>For safety-critical tools and machines, documentation is not an administrative afterthought. It is part of the control system that allows engineering, safety, maintenance and operations teams to understand what the equipment is designed for, how it was verified and how it must be used.<\/p>\n<p>Depending on the type of equipment and intended use, CE-related obligations may apply. In 2026, many machine-related products in the EU are still assessed under the Machinery Directive 2006\/42\/EC, while the Machinery Regulation (EU) 2023\/1230 is becoming increasingly relevant for future compliance planning. The correct route depends on the equipment category, timing and scope. Organizations should avoid treating CE marking as a simple label and instead manage conformity assessment as a structured engineering process.<\/p>\n<p>Practical documentation for custom lifting equipment often includes calculations, drawings, welding or material information where relevant, risk assessment, test records, inspection reports, operating instructions, maintenance guidance and a technical file. For end users, the most important documents are often the ones used in daily work: clear instructions, load limits, configuration limits, inspection points and practical advice on what to do when damage or wear is found.<\/p>\n<p>Document integrity matters beyond engineering files as well. In financial and operational control processes, organizations increasingly use tools such as <a href=\"https:\/\/www.docklands.ai\">AI invoice and receipt fraud detection software<\/a> to verify whether documents have been manipulated. In a safety-critical lifting context, the same mindset applies: teams need reliable records, controlled revisions and traceable evidence, so that decisions are based on the current and correct information.<\/p>\n<p>Good documentation should answer practical questions without requiring the operator to interpret the original design intent. What can be lifted? In which orientation? With which attachments? What checks are needed before use? What damage requires the tool to be taken out of service? Who is allowed to inspect, maintain or modify it?<\/p>\n<h2>Inspect before use, then manage the full service life<\/h2>\n<p>A custom lifting tool should not move from manufacturing directly into routine operation without verification. Before first use, the equipment should be checked against its design intent, documentation and applicable requirements. This may include visual inspection, dimensional checks, functional testing and overload testing where required or appropriate.<\/p>\n<p>However, first-use verification is only the start. Lifting equipment changes over time. Surfaces wear, pins deform, welds may develop defects, labels become unreadable, and operators may adapt how the tool is used. Even when a tool still appears to function normally, its safety margin may have changed.<\/p>\n<p>That is why periodic inspection and lifecycle management are essential. Inspection intervals should reflect the application, intensity of use, environment, criticality of the load and manufacturer or company requirements. A tool used daily in a demanding production environment needs a different inspection approach than a tool used occasionally under controlled conditions.<\/p>\n<div class=\"blogseo-table-wrapper\">\n<table class=\"blogseo-table\">\n<thead>\n<tr>\n<th>Lifecycle moment<\/th>\n<th>Main safety objective<\/th>\n<th>Typical evidence or action<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Concept and specification<\/td>\n<td>Define the task and reduce risks at the source.<\/td>\n<td>Task analysis, load data, environmental constraints and early risk assessment.<\/td>\n<\/tr>\n<tr>\n<td>Engineering and manufacturing<\/td>\n<td>Create a tool that matches the load path and use case.<\/td>\n<td>Calculations, drawings, material choices, manufacturing checks and assembly verification.<\/td>\n<\/tr>\n<tr>\n<td>Before first use<\/td>\n<td>Confirm the tool is built and functions as intended.<\/td>\n<td>Inspection, functional test, load test where applicable, report and release for use.<\/td>\n<\/tr>\n<tr>\n<td>Routine operation<\/td>\n<td>Keep the tool used within its intended limits.<\/td>\n<td>User instructions, pre-use checks, markings, operator feedback and incident reporting.<\/td>\n<\/tr>\n<tr>\n<td>Periodic inspection<\/td>\n<td>Detect wear, deformation, cracks or misuse before continued operation.<\/td>\n<td>Visual inspection, measurement, examination, test reports and usage advice.<\/td>\n<\/tr>\n<tr>\n<td>Modification or repair<\/td>\n<td>Prevent uncontrolled changes to the design basis.<\/td>\n<td>Engineering review, revised documentation, retesting where needed and controlled release.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>BKL is accredited according to ISO 17020:2012 for inspections and can support visual inspections, overload testing, examinations, reports and usage advice. This is particularly valuable for custom lifting tools, because inspection quality depends on understanding the original design, the load path and the real operating conditions. A generic visual check may not be enough when the tool has a specific interface, critical welds, tight tolerances or a unique use case.<\/p>\n<h2>Train users on limits, not only on operation<\/h2>\n<p>Training often focuses on the steps needed to use a lifting tool. That is necessary, but not sufficient. Operators and maintenance teams also need to understand the limits of the equipment.<\/p>\n<p>For example, a custom lifting beam may be safe for one module configuration but not for another that looks similar. A handling frame may be designed for a specific orientation but not for side loading. A rotation tool may require a defined locking sequence before the load is released. If these limits are not clear, even experienced operators can make unsafe assumptions.<\/p>\n<p>Useful training should therefore cover the intended use, prohibited use, load limits, attachment sequence, communication during lifting, pre-use checks, abnormal situations and stop criteria. Stop criteria are especially important. Teams should know when to pause the operation, remove the tool from service, request inspection, or escalate to engineering.<\/p>\n<p>Training should also include feedback loops. Operators often see early signs of practical issues before they appear in formal reports. If a pin is difficult to insert, a handle is awkward, a label is unclear, or a lift requires unnecessary manual correction, that feedback can reveal design or maintenance improvements.<\/p>\n<h2>Manage modifications and repairs with engineering control<\/h2>\n<p>One of the hidden risks with custom lifting equipment is uncontrolled modification. A small change can have a large effect on safety. Drilling an extra hole, replacing a pin with a non-equivalent part, grinding a contact surface, changing a sling angle, or welding on an additional bracket can alter load paths and invalidate previous assumptions.<\/p>\n<p>The same applies to repairs. A repair may restore visible function without restoring the original design basis. For safety-critical equipment, repair decisions should consider material, geometry, load transfer, weld quality, inspection requirements and whether retesting is needed.<\/p>\n<p>This does not mean every issue requires a completely new engineering project. It does mean modifications and repairs should be controlled. The responsible team should know what changed, why it changed, who approved it, which documents were updated and whether the tool remains suitable for its intended use.<\/p>\n<p>This control is especially important for OEMs and high-tech manufacturers that rely on specialized tools for production, installation and maintenance. If tooling availability is critical, lifecycle planning should include spare parts, inspection windows, repair procedures and escalation routes before a failure interrupts production.<\/p>\n<h2>Choose a partner that understands engineering, production and inspection<\/h2>\n<p>Working safe with custom lifting equipment requires more than a good concept. It requires continuity between design intent, manufacturing quality, verification, operator use and service life. When these phases are handled by disconnected suppliers, important information can be lost.<\/p>\n<p>BKL supports clients as a technical service provider in mechanics and mechatronics, with capabilities in engineering, production, inspections and related services. That combination is relevant for organizations that need partial support for a specific challenge as well as companies that prefer one partner for a complete solution.<\/p>\n<p>For example, an OEM may need engineering support for a complex lifting concept, manufacturing of a small series, inspection of existing tools, or lifecycle support for tools used during assembly and maintenance. A production manager may need a safer and more user-friendly handling method without reducing throughput. A safety manager may need clearer evidence that lifting equipment is still fit for use. A maintenance team may need practical advice after damage, wear or unexpected behavior is found.<\/p>\n<p>The value of an integrated approach is that safety is not treated as a single checkpoint. It is considered during concept development, detailed engineering, manufacturing, verification, operation, inspection and service. That is what helps organizations work safe while maintaining efficiency and tooling availability.<\/p>\n<h2>Practical checklist for safer custom lifting equipment<\/h2>\n<p>Before approving or using custom lifting equipment, teams should be able to answer several practical questions. If the answers are unclear, the risk is not necessarily unacceptable, but it is a signal that more engineering, documentation, inspection or user guidance may be needed.<\/p>\n<p>Ask whether the load, center of gravity and allowed configurations are clearly defined. Confirm that the tool has a documented working load limit and that the load path has been engineered for the real use case. Check whether operators can attach and verify the tool without placing hands in hazardous zones. Review whether the equipment includes clear markings, instructions and pre-use check points. Confirm that inspection intervals are defined and that reports are stored and reviewed. Finally, make sure modifications, repairs and deviations are controlled through engineering review rather than informal workshop changes.<\/p>\n<p>These questions are simple, but they help prevent a common problem: assuming that a custom tool remains safe because it once worked well. In safety-critical lifting, continued suitability must be maintained, not assumed.<\/p>\n<h2>FAQ&#039;s about working safe with custom lifting equipment:<\/h2>\n<p><strong>When is custom lifting equipment necessary?<\/strong> Custom lifting equipment is usually considered when standard lifting accessories cannot safely or efficiently handle the load, geometry, center of gravity, access limitations, cleanliness requirements or positioning accuracy. A standard solution should still be considered first if it fits the task and safety requirements.<\/p>\n<p><strong>What information is needed before designing a custom lifting tool?<\/strong> The design process should start with load mass, center of gravity, lifting points, required movements, operating environment, frequency of use, operator actions, available hoisting equipment and any relevant safety or compliance requirements. Missing assumptions should be verified before detailed engineering begins.<\/p>\n<p><strong>Does custom lifting equipment always need CE marking?<\/strong> CE requirements depend on the type of equipment, intended use and applicable EU legislation. Custom lifting tools and machinery-related products should be assessed case by case. A structured conformity assessment process, risk assessment and technical documentation are often essential, but no supplier should treat CE as a simple formality.<\/p>\n<p><strong>How often should custom lifting equipment be inspected?<\/strong> Inspection intervals should be based on the application, intensity of use, environment, criticality, manufacturer guidance and company procedures. Equipment used frequently, exposed to harsh conditions, or involved in safety-critical lifts may require more frequent or more detailed inspection.<\/p>\n<p><strong>What should operators check before using custom lifting equipment?<\/strong> Operators should verify that the tool is identified, rated for the intended load, visibly undamaged, correctly configured, properly attached and within its defined use limits. They should also check labels, pins, locking devices, deformation, wear and any instructions specific to the tool.<\/p>\n<p><strong>Why work with an engineering partner instead of only an inspection provider?<\/strong> Custom lifting equipment often requires knowledge of design intent, load paths, manufacturing methods, user behavior and inspection criteria. A partner that understands engineering, production, inspection and lifecycle support can help connect these phases and reduce the risk of gaps between design and daily use.<\/p>\n<h2>Make safe lifting part of the complete equipment lifecycle<\/h2>\n<p>Custom lifting equipment can improve safety, efficiency and control, but only when it is engineered and managed as part of a complete lifecycle. The safest results come from clear task definition, robust load-path design, practical operator usability, reliable documentation, controlled modifications and periodic inspections.<\/p>\n<p>If your organization needs support with custom lifting tools, industrial modules, inspections, manufacturing or lifecycle services, <a href=\"https:\/\/www.bkl.nl\/nl\/\">BKL<\/a> can help you develop technical solutions that are safe to use, practical to maintain and aligned with demanding industrial environments.<\/p>","protected":false},"excerpt":{"rendered":"<p>Custom lifting equipment is often introduced when a standard hook, sling, cart, or lifting beam cannot safely handle the geometry, value, sensitivity, or working environment of the load. In hightech m<\/p>","protected":false},"author":8,"featured_media":2069,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[17],"class_list":["post-2071","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-knowledge-base"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.9 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>How to work safe with custom lifting equipment<\/title>\n<meta name=\"description\" content=\"Learn how to work safe with custom lifting equipment through task definition, load-path engineering, inspections and lifecycle support.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.bkl.nl\/nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/\" \/>\n<meta property=\"og:locale\" content=\"nl_NL\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to work safe with custom lifting equipment\" \/>\n<meta property=\"og:description\" content=\"Learn how to work safe with custom lifting equipment through task definition, load-path engineering, inspections and lifecycle support.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.bkl.nl\/nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/\" \/>\n<meta property=\"og:site_name\" content=\"BKL\" \/>\n<meta property=\"article:published_time\" content=\"2026-06-18T22:49:53+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-17T14:34:57+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.bkl.nl\/wp-content\/uploads\/how-to-work-safe-with-custom-lifting-equipment-m-1781822988389.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"2048\" \/>\n\t<meta property=\"og:image:height\" content=\"1152\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"author\" content=\"Team BKL\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:title\" content=\"How to work safe with custom lifting equipment\" \/>\n<meta name=\"twitter:description\" content=\"Learn how to work safe with custom lifting equipment through task definition, load-path engineering, inspections and lifecycle support.\" \/>\n<meta name=\"twitter:image\" content=\"https:\/\/www.bkl.nl\/wp-content\/uploads\/how-to-work-safe-with-custom-lifting-equipment-m-1781822988389.webp\" \/>\n<meta name=\"twitter:label1\" content=\"Geschreven door\" \/>\n\t<meta name=\"twitter:data1\" content=\"Team BKL\" \/>\n\t<meta name=\"twitter:label2\" content=\"Geschatte leestijd\" \/>\n\t<meta name=\"twitter:data2\" content=\"13 minuten\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":[\"Article\",\"BlogPosting\"],\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/\"},\"author\":{\"name\":\"Team BKL\",\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/#\\\/schema\\\/person\\\/06359a37f00168702d76a4352678bbba\"},\"headline\":\"How to work safe with custom lifting equipment\",\"datePublished\":\"2026-06-18T22:49:53+00:00\",\"dateModified\":\"2026-07-17T14:34:57+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/\"},\"wordCount\":2878,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.bkl.nl\\\/wp-content\\\/uploads\\\/how-to-work-safe-with-custom-lifting-equipment-m-1781822988389.webp\",\"keywords\":[\"Knowledge Base\"],\"articleSection\":[\"Blog\"],\"inLanguage\":\"nl-NL\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/\",\"url\":\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/\",\"name\":\"How to work safe with custom lifting equipment\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.bkl.nl\\\/wp-content\\\/uploads\\\/how-to-work-safe-with-custom-lifting-equipment-m-1781822988389.webp\",\"datePublished\":\"2026-06-18T22:49:53+00:00\",\"dateModified\":\"2026-07-17T14:34:57+00:00\",\"description\":\"Learn how to work safe with custom lifting equipment through task definition, load-path engineering, inspections and lifecycle support.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/#breadcrumb\"},\"inLanguage\":\"nl-NL\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.bkl.nl\\\/wp-content\\\/uploads\\\/how-to-work-safe-with-custom-lifting-equipment-m-1781822988389.webp\",\"contentUrl\":\"https:\\\/\\\/www.bkl.nl\\\/wp-content\\\/uploads\\\/how-to-work-safe-with-custom-lifting-equipment-m-1781822988389.webp\",\"width\":2048,\"height\":1152,\"caption\":\"How to work safe with custom lifting equipment - Main Image\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/blog\\\/how-to-work-safe-with-custom-lifting-equipment\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.bkl.nl\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to work safe with custom lifting equipment\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/#website\",\"url\":\"https:\\\/\\\/www.bkl.nl\\\/\",\"name\":\"BKL\",\"description\":\"Smart engineering\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.bkl.nl\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"nl-NL\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/#organization\",\"name\":\"BKL Engineering\",\"url\":\"https:\\\/\\\/www.bkl.nl\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.bkl.nl\\\/wp-content\\\/uploads\\\/2022\\\/03\\\/logo_bkl_on_light.svg\",\"contentUrl\":\"https:\\\/\\\/www.bkl.nl\\\/wp-content\\\/uploads\\\/2022\\\/03\\\/logo_bkl_on_light.svg\",\"width\":\"1024\",\"height\":\"1024\",\"caption\":\"BKL Engineering\"},\"image\":{\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.linkedin.com\\\/company\\\/bkl-bv\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/#\\\/schema\\\/person\\\/06359a37f00168702d76a4352678bbba\",\"name\":\"Team BKL\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"nl-NL\",\"@id\":\"https:\\\/\\\/www.bkl.nl\\\/wp-content\\\/litespeed\\\/avatar\\\/abf3f527148591071f9d56774e4683b5.jpg?ver=1795102918\",\"url\":\"https:\\\/\\\/www.bkl.nl\\\/wp-content\\\/litespeed\\\/avatar\\\/abf3f527148591071f9d56774e4683b5.jpg?ver=1795102918\",\"contentUrl\":\"https:\\\/\\\/www.bkl.nl\\\/wp-content\\\/litespeed\\\/avatar\\\/abf3f527148591071f9d56774e4683b5.jpg?ver=1795102918\",\"caption\":\"Team BKL\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to work safe with custom lifting equipment","description":"Learn how to work safe with custom lifting equipment through task definition, load-path engineering, inspections and lifecycle support.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.bkl.nl\/nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/","og_locale":"nl_NL","og_type":"article","og_title":"How to work safe with custom lifting equipment","og_description":"Learn how to work safe with custom lifting equipment through task definition, load-path engineering, inspections and lifecycle support.","og_url":"https:\/\/www.bkl.nl\/nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/","og_site_name":"BKL","article_published_time":"2026-06-18T22:49:53+00:00","article_modified_time":"2026-07-17T14:34:57+00:00","og_image":[{"width":2048,"height":1152,"url":"https:\/\/www.bkl.nl\/wp-content\/uploads\/how-to-work-safe-with-custom-lifting-equipment-m-1781822988389.webp","type":"image\/webp"}],"author":"Team BKL","twitter_card":"summary_large_image","twitter_title":"How to work safe with custom lifting equipment","twitter_description":"Learn how to work safe with custom lifting equipment through task definition, load-path engineering, inspections and lifecycle support.","twitter_image":"https:\/\/www.bkl.nl\/wp-content\/uploads\/how-to-work-safe-with-custom-lifting-equipment-m-1781822988389.webp","twitter_misc":{"Geschreven door":"Team BKL","Geschatte leestijd":"13 minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Article","BlogPosting"],"@id":"https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/#article","isPartOf":{"@id":"https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/"},"author":{"name":"Team BKL","@id":"https:\/\/www.bkl.nl\/#\/schema\/person\/06359a37f00168702d76a4352678bbba"},"headline":"How to work safe with custom lifting equipment","datePublished":"2026-06-18T22:49:53+00:00","dateModified":"2026-07-17T14:34:57+00:00","mainEntityOfPage":{"@id":"https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/"},"wordCount":2878,"commentCount":0,"publisher":{"@id":"https:\/\/www.bkl.nl\/#organization"},"image":{"@id":"https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/#primaryimage"},"thumbnailUrl":"https:\/\/www.bkl.nl\/wp-content\/uploads\/how-to-work-safe-with-custom-lifting-equipment-m-1781822988389.webp","keywords":["Knowledge Base"],"articleSection":["Blog"],"inLanguage":"nl-NL","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/","url":"https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/","name":"How to work safe with custom lifting equipment","isPartOf":{"@id":"https:\/\/www.bkl.nl\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/#primaryimage"},"image":{"@id":"https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/#primaryimage"},"thumbnailUrl":"https:\/\/www.bkl.nl\/wp-content\/uploads\/how-to-work-safe-with-custom-lifting-equipment-m-1781822988389.webp","datePublished":"2026-06-18T22:49:53+00:00","dateModified":"2026-07-17T14:34:57+00:00","description":"Learn how to work safe with custom lifting equipment through task definition, load-path engineering, inspections and lifecycle support.","breadcrumb":{"@id":"https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/#breadcrumb"},"inLanguage":"nl-NL","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/"]}]},{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/#primaryimage","url":"https:\/\/www.bkl.nl\/wp-content\/uploads\/how-to-work-safe-with-custom-lifting-equipment-m-1781822988389.webp","contentUrl":"https:\/\/www.bkl.nl\/wp-content\/uploads\/how-to-work-safe-with-custom-lifting-equipment-m-1781822988389.webp","width":2048,"height":1152,"caption":"How to work safe with custom lifting equipment - Main Image"},{"@type":"BreadcrumbList","@id":"https:\/\/www.bkl.nl\/blog\/how-to-work-safe-with-custom-lifting-equipment\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.bkl.nl\/"},{"@type":"ListItem","position":2,"name":"How to work safe with custom lifting equipment"}]},{"@type":"WebSite","@id":"https:\/\/www.bkl.nl\/#website","url":"https:\/\/www.bkl.nl\/","name":"BKL","description":"Slimme techniek","publisher":{"@id":"https:\/\/www.bkl.nl\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.bkl.nl\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"nl-NL"},{"@type":"Organization","@id":"https:\/\/www.bkl.nl\/#organization","name":"BKL Engineering","url":"https:\/\/www.bkl.nl\/","logo":{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/www.bkl.nl\/#\/schema\/logo\/image\/","url":"https:\/\/www.bkl.nl\/wp-content\/uploads\/2022\/03\/logo_bkl_on_light.svg","contentUrl":"https:\/\/www.bkl.nl\/wp-content\/uploads\/2022\/03\/logo_bkl_on_light.svg","width":"1024","height":"1024","caption":"BKL Engineering"},"image":{"@id":"https:\/\/www.bkl.nl\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.linkedin.com\/company\/bkl-bv"]},{"@type":"Person","@id":"https:\/\/www.bkl.nl\/#\/schema\/person\/06359a37f00168702d76a4352678bbba","name":"Team BKL","image":{"@type":"ImageObject","inLanguage":"nl-NL","@id":"https:\/\/www.bkl.nl\/wp-content\/litespeed\/avatar\/abf3f527148591071f9d56774e4683b5.jpg?ver=1795102918","url":"https:\/\/www.bkl.nl\/wp-content\/litespeed\/avatar\/abf3f527148591071f9d56774e4683b5.jpg?ver=1795102918","contentUrl":"https:\/\/www.bkl.nl\/wp-content\/litespeed\/avatar\/abf3f527148591071f9d56774e4683b5.jpg?ver=1795102918","caption":"Team BKL"}}]}},"_links":{"self":[{"href":"https:\/\/www.bkl.nl\/nl\/wp-json\/wp\/v2\/posts\/2071","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.bkl.nl\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.bkl.nl\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.bkl.nl\/nl\/wp-json\/wp\/v2\/users\/8"}],"replies":[{"embeddable":true,"href":"https:\/\/www.bkl.nl\/nl\/wp-json\/wp\/v2\/comments?post=2071"}],"version-history":[{"count":0,"href":"https:\/\/www.bkl.nl\/nl\/wp-json\/wp\/v2\/posts\/2071\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.bkl.nl\/nl\/wp-json\/wp\/v2\/media\/2069"}],"wp:attachment":[{"href":"https:\/\/www.bkl.nl\/nl\/wp-json\/wp\/v2\/media?parent=2071"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.bkl.nl\/nl\/wp-json\/wp\/v2\/categories?post=2071"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.bkl.nl\/nl\/wp-json\/wp\/v2\/tags?post=2071"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}